Our projects below will show our expertise in general use, hot-rolled, cold-rolled, and high-strength Chrome Molly materials. All types of carbon steel are accurately and cost-effectively cut using abrasive waterjet machining because it is a cold process that uses no heat, which prevents edge hardening.
We have cut alloys such as 4130, 4340, A36, 1018, 1020, and many variants of these grades, including hardened tool steel such as A-2, 0-1, or D-2 that range in size from .003 shim stock up to 4 inch thick structural parts for heavy industry. All have edge finishes that are ready for use, eliminating secondary processes and saving time and money.
We can CNC cut your custom pipe flanges, large tractor parts, heavy machinery custom parts, gears, sprockets, and anything else! We cut 10,000 pounds of steel per month, and we normally have stock in the more common sizes like ¼”, ½”, ¾”, 1″, 1.25″, and 2″
Spline Socket
Carbon Steel Spline Socket
Description
We modified a spline shaft by cutting out the interior so that it can now be used as a socket. The depth of the cut was 6″.
Material
6″ thick carbon steel.
4 inch Steel Flanges
Carbon Steel Flanges
Description
These flanges were cut from 4″ carbon steel and are used by a utilities company
Material
4 Inch Carbon Steel
Plenum
Plenum Cover
Description
This is for an industrial machine exhaust.
Material
.125″ Carbon Steel
Machine Base
Heavy Industrial Machine Base
Description
These machine bases are used in the public utilities industry.
Material
1.5″ A36 Carbon Steel
Clutch Discs
Clutch Discs for Industrial Machinery
Description
These new discs were reverse-engineered from the original part on the right. We then cut a sample (middle part) for a fit check. On approval we cut the new rings from the steel (left).
Material
.125″ Carbon Steel
Rings
Modified Steel Ring
Description
We trimmed the I.D. concentric to the outer diameter.
Material
.625″ Carbon Steel
Nested Parts
Interior Safe Parts
Description
This photo shows close nesting and maximization of parts from a single sheet. These parts are for a safe manufacturer.
Material
.250″ Carbon Steel
Wrenches
Custom Wrenches
Description
We cut these wrench blanks for the custom tool division of a major hand tool manufacturer.
Material
1/2″ Carbon Tool Steel
Brackets
TV Brackets
Description
These are television brackets for an off-road recreational vehicle.
Material
.250″ Carbon Steel
Fireplace Surround
Woven Steel Fireplace Surround
Description
The fireplace insert opening was cut from digitizing a paper pattern. Slots were cut in the surrounding material and .375″ steel rods were inserted to create the woven effect.
Material
.125″ Carbon Steel
Pitman Arm
Notched Pitman Arm
Description
This pitman arm was cut for an off-road vehicle. The detailed notching mates with the spline shaft.
Material
.625″ Carbon Steel
Knife
Military Style Knife Blanks
Description
We cut the blanks for several military style knives maximizing material yield through close parts nesting.
Material
.250″ CPM D2 Steel
.265″ S30V Steel
Base Plate
Motor Base Plate
Description
We cut this base plate for an electric motor and pulley assembly for large iscale industrial use.
Material
.750″ A36 Carbon Steel
Tree
Logo Signage
Description
This sign was cut for the Fallbrook Chamber of Commerce.
Material
.125″ Carbon Steel
Flange
Water Brake Flange
Description
This flange is used on large public utilities vehicles to hold a water brake clutch that dispenses cable for high tension wires.
Material
2.25″ Carbon Steel
Scroll Inlay
Metal Inlay for Wood Gate
Description
The first piece was cut from plywood to proof the design of these gate inlays. Final scroll designs were cut and mounted on a wood gate.
Material
.375″ Carbon Steel
Tools
Custom Bucking Bars
Description
These hand tools are made from tool steel for an aerospace application.
Material
1.0 – 1.5″ Carbon Steel
Sword Hilt
Two-Stage Waterjet Cutting to Create Hilt
Description
This is a good example of 3D Waterjet cutting. It was accomplished through a two-staged operation: first the profile was cut and then the part was rotated 90 degrees and then the slot was cut finishing the part.
Material
1.5″ A36 Carbon Steel
Truss Support
Decorative and Structural Truss Supports
Description
Custom designed truss supports for commercial shopping center.
Material
.1875″ Carbon Steel
Swing Arm
Fabricated Box Structure Swing Arm
Description
We cut these front end suspension parts for our customer who designed this custom swing arm for higher suspension travel and lighter weight for off-road trucks.
Material
.125″ 4130 Carbon Steel
Driveplate
Fast Repair Part
Description
Our customer brought us this repair item for large scale drilling equipment. This broken driveplate part had shut down the entire job site and the replacement part was 8 weeks out in delivery! We provided a service called reverse engineering by tracing the broken part and creating a CAD file for it. We were then able to cut a new part within hours for a very low cost. So when you have a part that you need fast, consider our engineering and fast turn-round service to solve your problem!
Material
.125″ Carbon Steel